dmesg - furmark gputest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ca791fff] usable
BIOS-e820: [mem 0x00000000ca792000-0x00000000ca798fff] ACPI NVS
BIOS-e820: [mem 0x00000000ca799000-0x00000000cabdcfff] usable
BIOS-e820: [mem 0x00000000cabdd000-0x00000000cb16dfff] reserved
BIOS-e820: [mem 0x00000000cb16e000-0x00000000ddd98fff] usable
BIOS-e820: [mem 0x00000000ddd99000-0x00000000dde2efff] reserved
BIOS-e820: [mem 0x00000000dde2f000-0x00000000dde7ffff] usable
BIOS-e820: [mem 0x00000000dde80000-0x00000000ddfb8fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddfb9000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7816/B85-G43 GAMING (MS-7816), BIOS V12.5 06/04/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 00E0000000 mask 7FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 16352M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16864MB, range: 32MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ffff8800000fd850]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x41de00000-0x41dffffff]
[mem 0x41de00000-0x41dffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41ddfffff]
[mem 0x41c000000-0x41ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xca791fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xca5fffff] page 2M
[mem 0xca600000-0xca791fff] page 4k
init_memory_mapping: [mem 0xca799000-0xcabdcfff]
[mem 0xca799000-0xca7fffff] page 4k
[mem 0xca800000-0xca9fffff] page 2M
[mem 0xcaa00000-0xcabdcfff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xcb16e000-0xddd98fff]
[mem 0xcb16e000-0xcb1fffff] page 4k
[mem 0xcb200000-0xddbfffff] page 2M
[mem 0xddc00000-0xddd98fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xdde2f000-0xdde7ffff]
[mem 0xdde2f000-0xdde7ffff] page 4k
init_memory_mapping: [mem 0xdefff000-0xdeffffff]
[mem 0xdefff000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x34cd0000-0x3665ffff]
ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 00000000ddf88080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ddf97100 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ddf881a0 00EF5E (v02 ALASKA A M I 00000036 INTL 20120711)
ACPI: FACS 00000000ddfb8f80 000040
ACPI: APIC 00000000ddf97210 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ddf972a8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000ddf972f0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000ddf97830 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 00000000ddf98308 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000ddf98348 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ddf98380 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000ddf986f0 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: ASF! 00000000ddf9bc18 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: DMAR 00000000ddf9bcc0 000080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: SSDT 00000000ddf9bd40 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041dffffff]
Initmem setup node 0 [mem 0x00000000-0x41dffffff]
NODE_DATA [mem 0x41dff6000-0x41dffafff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040d600000-ffff88041d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xca791fff]
node 0: [mem 0xca799000-0xcabdcfff]
node 0: [mem 0xcb16e000-0xddd98fff]
node 0: [mem 0xdde2f000-0xdde7ffff]
node 0: [mem 0xdefff000-0xdeffffff]
node 0: [mem 0x100000000-0x41dffffff]
On node 0 totalpages: 4175855
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14114 pages used for memmap
DMA32 zone: 903251 pages, LIFO batch:31
Normal zone: 51072 pages used for memmap
Normal zone: 3268608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xca792000-0xca798fff]
PM: Registered nosave memory: [mem 0xcabdd000-0xcb16dfff]
PM: Registered nosave memory: [mem 0xddd99000-0xdde2efff]
PM: Registered nosave memory: [mem 0xdde80000-0xddfb8fff]
PM: Registered nosave memory: [mem 0xddfb9000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88041dc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4110584
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16331472K/16703420K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 371948K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3600.158 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.31 BogoMIPS (lpj=14400632)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000dee97000 end: 0x000000deea5fff
IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57602.52 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xca792000-0xca798fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdde80000-0xddfb8fff] (1282048 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:08:44, date: 12/10/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dde23c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000dde23618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000dde22d98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:6658] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1969:e091] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:04:00.0: [168c:002e] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05-06] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:06:01.0: [11bd:bede] type 00 class 0x048000
pci 0000:06:01.0: reg 0x10: [mem 0xf7b01000-0xf7b01fff]
pci 0000:06:01.1: [11bd:0015] type 00 class 0x0c0010
pci 0000:06:01.1: reg 0x10: [mem 0xf7b00000-0xf7b007ff]
pci 0000:06:01.1: supports D1 D2
pci 0000:06:01.1: PME# supported from D1 D2 D3hot
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [mem 0xf7b00000-0xf7bfffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xca792000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcabdd000-0xcbffffff]
e820: reserve RAM buffer [mem 0xddd99000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdde80000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a10-0x0a1f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0800000-0xf09fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0a00000-0xf0bfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-06]
pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:05: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26176K (ffff880034cd0000 - ffff880036660000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9d99000-0xddd99000] (64MB) mapped at [ffff8800d9d99000-ffff8800ddd98fff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x19
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1418238524.488:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31948
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:867:141
block ram6: hash matches
acpi device:12: hash matches
rtc_cmos 00:06: setting system clock to 2014-12-10 19:08:44 UTC (1418238524)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[144]: starting version 204
wmi: Mapper loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:83:89:f8]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 43
ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 43
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata3.00: ATA-7: ST3500630AS, 3.ADG, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AD PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 3599.997 MHz
usb 3-5: new low-speed USB device number 2 using xhci_hcd
usb 3-5: New USB device found, idVendor=413c, idProduct=2003
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: Dell USB Keyboard
usb 3-5: Manufacturer: Dell
usb 3-5: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input5
hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-5/input0
usb 3-6: new high-speed USB device number 3 using xhci_hcd
usb 3-6: New USB device found, idVendor=1058, idProduct=1021
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-6: Product: Ext HDD 1021
usb 3-6: Manufacturer: Western Digital
usb 3-6: SerialNumber: 574341565934373532363134
usb-storage 3-6:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-6:1.0
usbcore: registered new interface driver usb-storage
random: nonblocking pool is initialized
usb 3-7: new low-speed USB device number 4 using xhci_hcd
usb 3-7: New USB device found, idVendor=046d, idProduct=c050
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-7: Product: USB-PS/2 Optical Mouse
usb 3-7: Manufacturer: Logitech
usb 3-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input6
hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-7/input0
Switched to clocksource tsc
scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdc] Asking for cache data failed
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdc] Asking for cache data failed
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sdc: p1 size 2930275120 extends beyond EOD, enabling native capacity
sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdc] Asking for cache data failed
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sdc: p1 size 2930275120 extends beyond EOD, truncated
sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdc] Asking for cache data failed
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 15624188k swap on /dev/sda6. Priority:-1 extents:1 across:15624188k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[474]: starting version 204
lp: driver loaded but no devices found
nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00
ppdev: user-space parallel port driver
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
lp0: using parport0 (interrupt-driven).
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
ata3.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
ata3.00: irq_stat 0x08000000, interface fatal error
ata3: SError: { UnrecovData HostInt 10B8B BadCRC }
ata3.00: failed command: READ FPDMA QUEUED
ata3.00: cmd 60/08:00:68:01:00/00:00:00:00:00/40 tag 0 ncq 4096 in
res 40/00:00:68:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
ata3.00: status: { DRDY }
ata3: hard resetting link
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
device-mapper: multipath: version 1.6.0 loaded
cfg80211: Calling CRDA to update world regulatory domain
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 15604 MBytes.
[fglrx] vendor: 1002 device: 6658 revision: 0 count: 1
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with 1 minors
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
ata3.00: configured for UDMA/133
ata3: EH complete
hda_codec: ALC1150: SKU not ready 0x00000000
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x00000000 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90005ba0000, irq=18
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
ip_tables: (C) 2000-2006 Netfilter Core Team
ata3.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6
ata3.00: irq_stat 0x40000001
ata3: SError: { HostInt 10B8B }
ata3.00: failed command: SET FEATURES
ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
res 51/04:fe:00:00:00/00:00:00:00:00/40 Emask 0x41 (internal error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { ABRT }
ata3: hard resetting link
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1048) killed by TERM signal
init: avahi-cups-reload main process (1181) terminated with status 1
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: samba-ad-dc main process (1219) terminated with status 1
alx 0000:03:00.0: irq 47 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:03:00.0 eth0: NIC Up: 100 Mbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
wlan0: authenticate with 4c:ac:0a:24:23:c1
wlan0: send auth to 4c:ac:0a:24:23:c1 (try 1/3)
wlan0: authenticated
wlan0: associate with 4c:ac:0a:24:23:c1 (try 1/3)
wlan0: RX AssocResp from 4c:ac:0a:24:23:c1 (capab=0x411 status=0 aid=7)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 4c:ac:0a:24:23:c1 by local choice (reason=2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 4c:ac:0a:24:23:c1
wlan0: send auth to 4c:ac:0a:24:23:c1 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with 4c:ac:0a:24:23:c1 (try 1/3)
wlan0: RX AssocResp from 4c:ac:0a:24:23:c1 (capab=0x411 status=0 aid=7)
wlan0: associated
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x1f5 offMax=0x1b45
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.12 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2026) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (2098) terminated with status 1
fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 2188
[fglrx] Firegl kernel thread PID: 2189
[fglrx] Firegl kernel thread PID: 2190
[fglrx] IRQ 48 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f6b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f6b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:fc00000, size:100000
[fglrx] Reserved FB block: Unshared offset:7ffee000, size:12000
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
cgroup: systemd-logind (1209) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
ata3: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7
ata3: SError: { HostInt 10B8B }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata3: irq_stat 0x00400040, connection status changed
ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata3: irq_stat 0x00400040, connection status changed
ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata3: irq_stat 0x00400040, connection status changed
ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata3: irq_stat 0x00400040, connection status changed
ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
ata3: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
ata3: irq_stat 0x00400040, connection status changed
ata3: SError: { HostInt PHYRdyChg 10B8B DevExch }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
[UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:90:d0:63:ff:00:08:00 SRC=10.60.26.129 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2